HEBEL Maison, CP Products GOAL V-TXJ.TXKJ / SKJ-TM with security thumbturn Lost key, Unlocking the entrance door

"Lost key, Unlocking the entrance door"

I usually declared it as a thumbturn, but a GOAL TM type thumbturn was attached to the door of the shared entrance at the site. I didn't think it was necessary for the automatic lock at the entrance, but I thought that each house had this type of security thumbturn installed.

Now, I started removing the door scope with a normal special tool, but it spins and does not come off at all. Decorative moldings are attached to the door in a cross shape, and the door scope is embedded in the back.

Since there is no room for the tool to enter, I tried various things, but I can not destroy it.I've also tried unlocking the gap in the door, but that doesn't work either.As expected, Asahi Kasei's "HEBEL HAUS (HEBEL HAUS) rental housing 'HEBEL Maison'".The finish is robust.

If I couldn't pull it out, I used a screwdriver to deform the flange part and destroy it as a way to push it in. You can use this method from now on.

When I checked with the camera, it was still a TM type security thumbturn. I was able to unlock it using a special tip tool.

The TXKJ series of CP product's fairly robust lever handle locks, the cylinder is also a CP product's GOAL V-TXJ #11 (#11 is a silver color number) cylinder. is.

If it's a long pull-leg, you may be able to use a normal V18-TX (pull-leg screw pitch 25mm) cylinder and force it to be installed if it's a long screw for pull-leg.However, rather than replacing the cylinder set, it is better to replace the V18 core cylinder while keeping the current housing as it is.