WEST324-S1805 (KH-AS) Sliding door lock replacement work warehouse

"I want you to exchange the key of the work warehouse"

He lost the key and hadn't locked it for about 10 years, but he says he wants to use a new key because the neighborhood has become a mess.

I was hoping for a good cost performance, so I chose a 4-pin cylinder instead of selecting a dimple cylinder.It seems that it was difficult to do the conventional cylinder because it is operated while pushing it.The cylinder this time does not require that operation.

I thought that the replacement work would be completed in a short time.After replacing the outer cylinder unit, next is the replacement on the thumbturn side.However, the door thickness was 48mm.If you adjust it with the included thumbturn unit, you will not be able to lock and unlock it stably.Apparently the arm pin seems to be short.

(What to do now)

I wonder if it can be managed with the spring pin of the stock part, select the right one, process it to fit the door thickness and install it.It is now possible to lock and unlock in a stable manner.It took a while, but I was able to adjust it well.