YKKap/ALPHA Pitatto Key lock Cylinder breaking and unlocking

"The door closed on its own and was locked out"

There is only one locking point, and it is a type that can be opened and closed with a card key and a dimple key.

It was a detached terrace house type rental property, and it was declared that there was no door scope or door post.

By the way, what is expected to be able to operate the card key and dimple key in one place is ALPHA ed-Lock plus, or even if the dimple cylinder for emergency unlocking is destroyed, it will be replaced if it is replaced. Haven't you set a password to unlock it?

When I arrived at the site, it was a newly built property, and it was not even on the map yet.

There is also a veranda, but it is quite high and there is no gap to approach. The only option is to unlock it from the front door.

When I looked at the entrance, it was a YKKap key push-pull grip handle lock. I see, it was this type...

I explained the estimated amount, but 60 minutes have passed since I arrived after being quite troubled.

After all, cylinder exchange was postponed as only breaking.

This type is automatically locked with a 50-second timer, so proceed from the top to unlock the cylinder, and then operate the 50-second timer to prevent the deadbolt from locking.

A hole saw is faster, but this type cannot be used because the opening is small. I will proceed with a rotating file again this time.

Unlocking on the lower side will also proceed with a rotating file. It will unlock after a while. It took quite some time, but the client was relieved to be able to enter the room.

The unlocking direction of the cylinder is the downward unlocking direction. It is the same as MIWA's push-pull grip handle lock PGF714.